Save 25%

MFOS Noise Cornucopia Synth Laser Engraved 5Ux1U Laminate Front Panel

List price: £6.13
£4.58
(£5.50 UK, incl VAT) You save: £1.55 (25%)
Black Blue Red Green Orange Purple
7210-545
25 g
1 item(s)
End of line
+
Add to wish list

A 1.6mm thick Noise Cornucopia front panel - 5U high, 1U wide (nominal 8.75 x 1.75") made from a semi-rigid plastic material laser engraved to give a hard wearing surface. As a material, it is not suitable for being used without some form of rigid backing material (see below).

  • White artwork on a black background

We find that when using our panel mounting components such as pots and sockets, you can mount this panel to a rigid backboard of up to 3mm thick. The backboard can be plywood or Aluminium (ideally used 6082T6 or 5251 H22 grades as these are 'stiffer' than low grade 1050 types) for example and the panel component fixings will hold the two layers together. If you use a 3mm thick backboard, it does not leave enough thread length to use MFOS PCB mounting brackets but we have our own solution to this, our routed and tapped aluminium back panels.

Each panel is supplied ready engraved, cut to size with all holes cut out. The cut-outs suit the panel components we provide so check these out if you are using your own bits to ensure the diameters are suitable. We are can provide different size cut-outs on request although there will be an additional nominal charge to cover the extra labour time.

If you click on the image above, you will see a larger and higer resolution version, if you then click on the 'X' in the top right corner of the hi res version, it will zoom to full size.

You are free to use our artwork for your own personal use (not commercial use without conditional approval first), to help out in this regard you can down load a pdf version below which is unlocked and editable.

Downloads

Noise Cornucopia Artwork pdf

7210-045
£21.67 £17.20 (£20.64 UK, incl VAT)
7210-045
A bare PCB for the MFOS Noise Generator that features: White Noise. Pink-ish Noise High Pass Noise Adjustable Grainy Noise....
1 item(s)
End of line
+
Add to wish list

Customers also bought ....

7210-501
£12.26 £9.17 (£11.00 UK, incl VAT)
7210-501
A 1.6mm thick VCO front panel - 5U high, 2U wide (nominal 8.75 x 3.5") made from a semi-rigid plastic material laser engraved to give a hard wearing...
Black Blue Red Green Orange Purple
1 item(s)
End of line

7210-845
£5.82 £4.85 (£5.82 UK, incl VAT)
7210-845
A 5U high by 1U wide (222.25x44.45mm) 3mm thick high grade 5251 H22 aluminium back panel for use with our laser engraved front panel (see Related Products...
7 item(s)
End of line

7210-945
£1.58 £1.31 (£1.57 UK, incl VAT)
7210-945
Draft Description, more information and detailed photos to follow. Introduction Our 3mm thick acrylic PCB holders are for use with our MFOS synth...
2 item(s)
End of line

7210-045
£21.67 £17.20 (£20.64 UK, incl VAT)
7210-045
A bare PCB for the MFOS Noise Generator that features: White Noise. Pink-ish Noise High Pass Noise Adjustable Grainy Noise....
1 item(s)
End of line

7210-181
£1.42 (£1.70 UK, incl VAT)
7210-181
Aluminium mounting brackets + stainless steel M4x5mm cap head screws used for fixing our acrylic PCB holder to the rear of the 3mm aluminium back panel....
46 item(s)
End of line

Minimum quantity for "Soundtronics PCB Holder Mounting Bracket & Screw" is 2.