1N4148 3mV Matched Pairs

£0.55
(£0.66 incl VAT)
7212-481
Out of stock
+

A number of the YuSynth modules such as the VCO / VCLFO and Wavefolder require matched signal diodes for best performance. This is relatively easy to do yourself using the diode test function on a meter or if you prefer, you can purchase them from Soundtronics ready matched.

We carry out our diode matching under stable temperature conditions using a meter with a constant current of 100uA (to avoid self heating) and with a resolution of 0.01mV. We match diodes to better than 2mV using these approach which is well inside the 3mV specified for YuSynth modules.

Hi, Any idea when this item will be available? Regards

Asked by Christophe Cornu | 22/08/2018, 15:50 | 1 answer(s)

No posts found

Write a review

Customers also bought ....

7212-544
£0.57 (£0.68 incl VAT)
7212-544
The TL074 is a high speed J-FET input quad operational amplifer. It features well matched high voltage J-FET and bipolar transistors in a monolithic...
In stock

7220-901
£1.50 (£1.80 incl VAT)
7220-901
Our 3mm thick acrylic size 1 PCB holders are for use with the following YuSynth PCBs: YuSynth VCO LM394 YuSynth Steiner VCF YuSynth ARP VCF...
In stock

7163-142
£0.48 (£0.58 incl VAT)
7163-142
A rather unusal value resistor that is used in the YuSynth VCO. 50k, 0.125W 0.5% tolerance Body Size: 3.7 x 8.8mm
In stock

7220-002
£17.92 (£21.50 incl VAT)
7220-002
YuSynth VCLFO PCB Introduction A bare double sided through hole plated PCB (no need for the wire jumper links shown on the PCB layout)...
In stock

7212-857
£0.24 (£0.29 incl VAT)
7212-857
Quality 25 turn cermet potentiometers, fully sealed to withstand industrial cleaning solvents and harsh environments. Top adjustment. PCB pins...
Out of stock