1N4148 Matched 3mV Pack 14

£3.86
(£4.63 incl VAT)
7212-483
In stock
+

The Yusynth Diode VCF requires 14 matched signal diodes for best performance. This is relatively easy to do yourself using the diode test function on a meter or if you prefer, you can purchase them from Soundtronics ready matched.

We carry out our diode matching under stable temperature conditions using a meter with a constant current of 100uA (to avoid self heating) and with a resolution of 0.01mV. We match diodes to better than 2mV using these approach which is well inside the 3mV specified for YuSynth modules.

No FAQ found

No posts found

Write a review

Customers also bought ....

7220-901
£1.50 (£1.80 incl VAT)
7220-901
Our 3mm thick acrylic size 1 PCB holders are for use with the following YuSynth PCBs: YuSynth VCO LM394 YuSynth Steiner VCF YuSynth ARP VCF...
In stock

7212-733
£0.12 (£0.14 incl VAT)
7212-733
Used in a number of MFOS modules, yes we do stock lower priced ceramic capacitors but we prefer to use this higher quality type in our builds wherever...
In stock

7212-505
£0.97 (£1.16 incl VAT)
7212-505
The YuSynth Minimoog VCF and the Diode VCF use the CA3046 transistor array chips. These are obsolete chips and can be difficult to obtain. The batch we...
Out of stock

7212-793
£1.51 (£1.81 incl VAT)
7212-793
Based on a 100nF 100V box-type 5% tolerance metallised polyester film capacitor with a stacked construction but hand matched to 1% in sets of 4. This makes...
In stock

7300-610
£2.78 (£3.34 incl VAT)
7300-610
A pack of 11 different colours of 2m each. Tinned stranded conductors 7/0.2mm with an overall diameter of 1.4mm. Rated at 1kV max, 1.4A at 70 Deg C...
In stock