This small plate is designed to accept our fused IEC connector and voltage selector switch (not included) and is typically mounted on the rear of the cabinet. Made from 3mm acrylic and supplied complete with the two screws to attach the connector to the plate. You will also need 4 screws to attach the plate to the cabinet (not included). Acrylic is quite brittle so would would not recommend a cut-out in the cabinet of greater than 76x35mm.
The voltage selector switch is used with dual primary transformers allow for use on both 115V and 230V supplies.
Dimensions: 95x52.5mm
No FAQ found
No posts found