MFOS Micro Sample and Hold Synth Module Bare PCB

£15.93
(£19.12 UK, incl VAT)
7210-030
In stock
+

A bare PCB for the MFOS Micro Sample and Hold module.

Features:

  • Variable sample rate
  • Output voltage glide (portamento)

Supplied without components or instructions, Soundtronics stock all components needed to build these modules as well as fully assembled and tested versions for those who prefer not to tackle the construction.

Check out our DIY Build Pages for supporting documentation and advice.

Tutorial for the construction of the MFOS Micro S&H PCB.

Notes:

We use PCB jigs to support our PCBs plus a component forming machine to bend the leads and then crop them ready for insertion into the PCB. We then place 20 or more resistors at a time into the PCB before soldering them from the top side of the PCB. Unless you also have similar equipment, you will need to take things a bit slower using whatever techniques you are comfortable with. If you need any specific advise with how to assemble PCBs, please post a question on our forum and we will try and assist.

Prerequisites:

  • You will need to be proficient at soldering small electronic components onto a PCB
  • You will need to be able to identify electronics components, their value and whether it matters which way around they are inserted. Generally, it does not matter which way around resistors, presets (although it will affect whether a clockwise rotation increases or decreases the setting), ceramic, polystyrene and non-polarised electrolytic capacitors are inserted. However, Diodes (incl LEDs), IC sockets + chips, 'normal' electrolytic caps, transistors do matter and failure to insert with the correct orientation is very likely to result in one or multiple component failures when power is applied.
  • You have all necessary components as defined in the MFOS technical instructions and / or the parts list from the Soundtronics kit of parts
  • You will need basic electronics assembly tools such as side cutters, snipe nose pliers and a soldering iron of 15-25W or a higher power if temperature controlled (soldering iron station)
  • You have access to the MFOS PCB layout schematics.

Special Notes:

This particular board has a wider diode pitch than most MFOS boards. This is no an issue for most constructors although for Soundtronics it is a small problem as our diodes are preformed for the narrower pitch.

Construction Sequence:

As per standard practice, it is best to assemble the PCB by inserting / soldering components in ascending height order.

Firstly - Resistors & Diodes

 

... IC Socket followed by the Ceramic caps

... Transistor, Electrolytic Caps and finally the Polystyrene Cap

 

 

No FAQ found

7210-230
£8.74 (£10.49 UK, incl VAT)
7210-230
Have the right skills, tools and test gear to build your own modular synth, then our kits of parts may be just what you need. As a minimum, you will need to...
Out of stock
Made to Order Product
Please allow 5-7 days for shipping
+

7210-530
£4.90 (£5.88 UK, incl VAT)
7210-530
A 1.6mm thick Micro Sample and Hold front panel - 5U high, 1U wide (nominal 8.75 x 1.75") made from a semi-rigid plastic material laser engraved to give a...
In stock
Made to order
Please allow 5-7 days for shipping
+

No posts found

Write a review

Customers also bought ....

7210-076
£34.39 (£41.27 UK, incl VAT)
7210-076
A bare PCB for the MFOS Sound Lab Mini Synth project. This project is fun for someone with intermediate to advanced electronics skills who wants to...
In stock

7212-103
£3.21 (£3.85 UK, incl VAT)
7212-103
A pack of 3, black aluminium-clad plastic knob with an attractive professional finish. The black anodised body is relieved by bright, diamond-cut features...
In stock

7212-203
£7.14 (£8.57 UK, incl VAT)
7212-203
A pack of 3 high quality 1/4" mono jack sockets that we use as standard on our MFOS range of synth modules. These sockets are the PCB...
In stock

7212-204
£9.52 (£11.42 UK, incl VAT)
7212-204
A pack of 4 high quality 1/4" mono jack sockets that we use as standard on our MFOS range of synth modules. These sockets are the PCB...
In stock

7210-081
£13.94 (£16.73 UK, incl VAT)
7210-081
A bare PCB for the MFOS Wall Wart Bipolar Power Supply. Excellent Sound Lab power supply. Can use LM78XX/LM79XX or LM78LXX/LM79LXX regulators...
In stock