MFOS Ring Modulator Synth Laser Engraved 5Ux2U Laminate Front Panel

£9.80
(£11.76 incl VAT)
7210-561
In stock
More stocks available in 1-4 days
+

A 1.6mm thick Ring Modulator front panel - 5U high, 2U wide (nominal 8.75 x 3.5") made from a semi-rigid plastic material laser engraved to give a hard wearing surface. As a material, it is not suitable for being used without some form of rigid backing material (see below).

  • White artwork on a black background

We find that when using our panel mounting components such as pots and sockets, you can mount this panel to a rigid backboard of up to 3mm thick. The backboard can be plywood or Aluminium (ideally used 6082T6 or 5251 H22 grades as these are 'stiffer' than low grade 1050 types) for example and the panel component fixings will hold the two layers together. If you use a 3mm thick backboard, it does not leave enough thread length to use MFOS PCB mounting brackets but we have our own solution to this, our routed and tapped aluminium back panels.

Each panel is supplied ready engraved, cut to size with all holes cut out. The cut-outs suit the panel components we provide so check these out if you are using your own bits to ensure the diameters are suitable. We are can provide different size cut-outs on request although there will be an additional nominal charge to cover the extra labour time.

If you click on the image above, you will see a larger and higer resolution version, if you then click on the 'X' in the top right corner of the hi res version, it will zoom to full size.

You are free to use our artwork for your own personal use (not commercial use without conditional approval first), to help out in this regard you can down load a pdf version below which is unlocked and editable.

Downloads

Ring Modulator Artwork pdf

No FAQ found

7210-061
£23.04 (£27.65 incl VAT)
7210-061
A bare PCB for the MFOS Ring Modulator that features: Internal sine wave oscillator. Two input channels with gain of 1 to 100. Internal...
In stock
+

7210-261
£25.37 (£30.44 incl VAT)
7210-261
Have the right skills, tools and test gear to build your own modular synth, then our kits of parts may be just what you need. As a minimum, you will need to...
In stock
More stocks available in 1-4 days
+

No posts found

Write a review

Customers also bought ....

7212-206
£14.28 (£17.14 incl VAT)
7212-206
A pack of 6 high quality 1/4" mono jack sockets that we use as standard on our MFOS range of synth modules. These sockets are the PCB...
In stock

7212-106
£5.39 £5.07 (£6.08 incl VAT)
7212-106
A pack of 6, black aluminium-clad plastic knob with an attractive professional finish. The black anodised body is relieved by bright, diamond-cut features...
In stock

7212-102
£1.80 £1.69 (£2.03 incl VAT)
7212-102
A pack of 2, black aluminium-clad plastic knob with an attractive professional finish. The black anodised body is relieved by bright, diamond-cut features...
In stock

7212-203
£7.14 (£8.57 incl VAT)
7212-203
A pack of 3 high quality 1/4" mono jack sockets that we use as standard on our MFOS range of synth modules. These sockets are the PCB...
In stock

7212-104
£3.59 £3.38 (£4.06 incl VAT)
7212-104
A pack of 4, black aluminium-clad plastic knob with an attractive professional finish. The black anodised body is relieved by bright, diamond-cut features...
In stock