Save 16%

MFOS Sub-Commander Guitar Synth Acrylic PCB Holder

List price: £2.31
£1.93
(£2.32 UK, incl VAT) You save: £0.38 (16%)
7210-936
86 g
Currently Unavailable
Discontinued Product

Draft Description, more information and detailed photos to follow.

Introduction

Our 3mm thick acrylic PCB holders are for use with our MFOS synth aluminium back panels. The PCB holder is attached to the aluminium back panel with our Soundtronics 'L' brackets (unless otherwise stated) and the PCB attaches to the holder with a fixing screw set.

Advantages

  • Allows the PCB to be sited in the optimal position independent of panel controls
  • Protects the rear of the PCB from accidental short circuits
     

Actual photos of the PCB holder in this module to follow but the following photos of the VCO module shows a typical arrangement.

Soundtronics VCO PCB Holder

Soundtronics VCO MOdule Complete with PCB Holder

Customers also bought ....

7210-036
£50.19 £31.87 (£38.24 UK, incl VAT)
7210-036
The MFOS Sub-Commander Guitar Synth buffers your guitar's signal, creates a pulse waveform (at the same frequency as the guitar) divides it's frequency in...
2 item(s)
End of line

7210-536
£24.53 £18.34 (£22.01 UK, incl VAT)
7210-536
A 1.6mm thick MFOS Sub-Commander Guitar Synth front panel - 5U high, 4U wide (nominal 8.75 x 7") made from a semi-rigid plastic material laser...
Black Blue Red Green Orange Purple
Currently Unavailable
Discontinued Product

7210-236
£77.23 £66.86 (£80.23 UK, incl VAT)
7210-236
Have the right skills, tools and test gear to build your own guitar sub-commander, then our kits of parts may be just what you need. As a minimum, you will...
Currently Unavailable
Discontinued Product

7210-035
£16.73 £10.62 (£12.74 UK, incl VAT)
7210-035
A bare PCB for the MFOS Guitar Envelope Follower. The main idea of an envelope follower is to create a voltage that describes the envelope of the...
3 item(s)
End of line

7210-977
£2.10 £1.75 (£2.10 UK, incl VAT)
7210-977
Draft Description, more information and detailed photos to follow. Introduction Our 3mm thick acrylic PCB holders are for use with our MFOS synth...
1 item(s)
End of line