MFOS VCLFO Module

Voltage controlled low frequency oscillator

Features

  • Simultaneous Sine, Triangle, Saw, Ramp, and Variable Pulse Width Rectangle Outputs.
  • Voltage Control of Frequency (approximate log response, NOT 1V/Octave)
  • Voltage Control of Rectangle Pulse Width
  • Fine and Coarse Frequency Control
  • Very Low Frequency (1 Cycle per several minutes)
  • Output levels are all approximately +/-5V (+ or - 300 mV).
£17.14 (£20.57 incl VAT)
7210-002
A bare PCB for the MFOS Voltage Controller Low Frequency Oscillator.   Features Simultaneous Sine, Triangle, Saw, Ramp, and Variable...
Out of stock
+

£4.10 (£4.92 incl VAT)
7210-402
We find that wiring a MFOS PCB to the front panel controls is both time consuming and often detracts from the overall finish. We are not able to alter the...
Out of stock
+

£18.81 (£22.57 incl VAT)
7210-202
Have the right skills, tools and test gear to build your own modular synth, then our kits of parts may be just what you need. As a minimum, you will need to...
In stock
+

£4.90 (£5.88 incl VAT)
7210-502
A 1.6mm thick VCLFO front panel - 5U high, 1U wide (nominal 8.75 x 1.75") made from a semi-rigid plastic material laser engraved to give a hard wearing...
Out of stock
+

£4.16 (£4.99 incl VAT)
7210-802
A 5U high by 1U wide (222.25x44.45mm) 3mm thick high grade 5251 H22 aluminium back panel for use with our laser engraved front panel (see Related Products...
In stock
+

£1.50 (£1.80 incl VAT)
7210-902
Introduction Our 3mm thick acrylic PCB holders are for use with our MFOS synth aluminium back panels . The PCB holder is attached to the aluminium...
In stock
+

£2.69 £2.53 (£3.04 incl VAT)
7212-103
A pack of 3, black aluminium-clad plastic knob with an attractive professional finish. The black anodised body is relieved by bright, diamond-cut features...
In stock
+

£19.04 (£22.85 incl VAT)
7212-208
A pack of 8 high quality 1/4" mono jack sockets that we use as standard on our MFOS range of synth modules. These sockets are the PCB...
In stock
+