MFOS VCO Module

The heart of a modular synth - voltage controlled oscillator.

Features

  • Years of MFOS VCO improvements all rolled into this design.
  • Good tracking over several octaves (6 to 8).
  • Can be temperature compensated with a metal film 2K Ohm 1/4W +/-2% T.C. +3300 PPM tempco.
  • Simultaneous Rectangle, Ramp, Triangle and Sine Outputs (Ramp core design)
  • Designed for 1V/Octave control voltage
  • 4 1V/Octave control voltage inputs.
  • 1 Linear control voltage input.
  • Hard sync input.
  • Rectangle wave duty cycle adjustable between 10% and 90%
  • Rectangle wave duty cycle voltage controllable
  • Frequency range is from sub audible (approximately 0.1 hertz) to ultra-sonic 20kHz.
  • Power supply can be +/-12 or +/-15 volts.
£20.16 (£24.19 incl VAT)
7210-001
A bare PCB for the MFOS Voltage Controlled Oscillator which allows use of SOIC or DIP8 SSM2210 or SSM2212 dual NPN package or discrete matched NPN pair....
In stock
+

£7.02 (£8.42 incl VAT)
7210-401
We find that wiring a MFOS PCB to the front panel controls is both time consuming and often detracts from the overall finish. We are not able to alter the...
In stock
+

£25.40 (£30.48 incl VAT)
7210-201
Have the right skills, tools and test gear to build your own modular synth, then our kits of parts may be just what you need. As a minimum, you will need to...
In stock
More stocks available in 1-4 days
+

£9.80 (£11.76 incl VAT)
7210-501
A 1.6mm thick VCO front panel - 5U high, 2U wide (nominal 8.75 x 3.5") made from a semi-rigid plastic material laser engraved to give a hard wearing...
In stock
More stocks available in 1-4 days
+

£8.32 (£9.98 incl VAT)
7210-801
A 5U high by 2U wide (222.25x88.9mm) 3mm thick high grade 5251 H22 aluminium back panel for use with our laser engraved front panel (see Related Products...
In stock
Made to order
Normally dispatched within 1-6 days
+

£1.50 (£1.80 incl VAT)
7210-901
Introduction Our 3mm thick acrylic PCB holders are for use with our MFOS synth aluminium back panels . The PCB holder is attached to the aluminium...
In stock
Made to order
Normally dispatched within 1-6 days
+

£4.49 £4.22 (£5.06 incl VAT)
7212-105
A pack of 5, black aluminium-clad plastic knob with an attractive professional finish. The black anodised body is relieved by bright, diamond-cut features...
In stock
+

£23.80 £23.10 (£27.72 incl VAT)
7212-210
A pack of 10 high quality 1/4" mono jack sockets that we use as standard on our MFOS range of synth modules. These sockets are the PCB...
In stock
+