Have the right skills, tools and test gear to build your own analogue synth, then our kits of parts for the MIDI Ultimate may be just what you need. As a minimum, you will need to be able to identify electronic components, recognise when they need to be correctly orientated, to be able to use a small soldering iron and finally have access to test equipment.
The kits include all required electronics components as well as pots & switches. The PCB, connectors and knobs are not included but available from Soundtronics as an option. Our front panel + matching back panel really finish off the build in a truly professional way. If you purchase the PCB and components through Soundtronics, then we will also support you with technical assistance just in case you get into any build difficulties.
We only source quality components and we even include the more expensive turned pin IC sockets as we feel the product justifies the extra cost both for reliability and serviceability. Our optional 1/4" jack sockets are by Switchcraft, yes you can save money by buying cheaper sockets hence us offering it as an option because we recognise they are a significant cost. Finally, all components are available individually should you not need to purchase the whole kit.
Each Kit Contains:
|Qty||Description||Value||Designator||ST Part No.|
|2||100nF 5mm X7R Dielectric Radial Ceramic Capacitor||100nF||C21, C23||7212-749|
|1||10uF 50V Non-Polarised Electrolytic Capacitor||10uF||C22||7213-315|
|1||1N914 75V Signal Diode||D5||7212-486|
|1||5mm LED Green High Efficency 20mcd||Green||D4||7213-902|
|1||PN4391 N Channel Switch JFET Transistor||Q4||7212-416|
|2||3k 0.25W 1% Metal Film Resistor||3k||R37, R43||7163-062|
|1||4k7 0.25W 1% Metal Film Resistor||4k7||R38||7163-067|
|1||20k 0.25W 1% Metal Film Resistor||20k||R42||7163-082|
|2||100k 0.25W 1% Metal Film Resistor||100k||R39, R40||7163-099|
|1||680k 0.25W 1% Metal Film Resistor||680k||R41||7163-118|
|1||Single Op-Amp BiFET TL071||U5||7212-541|
|1||Turned Pin 0.3 inch Dil IC Socket 8 Pin||7212-331|
|1||Pot 9mm PCB Mount, Insulated Shaft 1M Linear||VR12||7300-795|
No FAQ found
No posts found