Synth Mounting Plates & Brackets

£4.32 (£5.18 incl VAT)
7210-180
These are 1mm thick aluminum brackets that have a 3/8" hole and a 5/32" hole on one side and a slot that accomodates 6-32 (or just about M4)...
Currently Unavailable
No date for new stocks

£1.20 (£1.44 incl VAT)
7210-181
A pair of aluminium mounting brackets + stainless steel M4x5mm cap head screws used for fixing our acrylic PCB holder to the rear of the 3mm aluminium...
In stock
+

£0.60 (£0.72 incl VAT)
7210-182
A set of fixings for use with our acrylic PCB holders and mounting brackets. Set includes the following: For fixing PCB to acrylic PCB holder...
In stock
+

£1.00 (£1.20 incl VAT)
7210-183
A pack of 50 nylon spacers with a clearance hole for M3 screws. Height 3mm, overall diameter 7mm. Typically used with our PCB holders and power distribution...
In stock
+

£0.66 (£0.79 incl VAT)
7210-184
When using our MFOS and Yusynth projects in a modular synth, the PCB holder is attached to the panel using angle brackets. Sometimes, the PCB holder is...
In stock
+

£4.16 (£4.99 incl VAT)
7210-898
A 5U high by 1U wide (222.25x44.45mm) 3mm thick high grade 5251 H22 aluminium back panel for use with our laser engraved blank front panel. This back panel...
In stock
+

£8.32 (£9.98 incl VAT)
7210-899
A 5U high by 2U wide (222.25x88.9mm) 3mm thick high grade 5251 H22 aluminium back panel for use with our laser engraved blank front panel. The panel only...
In stock
+

£1.90 (£2.28 incl VAT)
7210-598
A blank laminate infill panel 1U wide by 5U high to blank off an unused slot in your modular synth. Like all of our laminate front panels, this panel should...
In stock
+

£2.90 (£3.48 incl VAT)
7210-599
A blank laminate infill panel 2U wide by 5U high to blank off an unused slot in your modular synth. Like all of our laminate front panels, this panel should...
In stock
+

£0.75 (£0.90 incl VAT)
7210-150
This small plate is designed to accept our fused IEC connector (not included) and is typically mounted on the rear of the cabinet. Made from 3mm acrylic and...
In stock
+

£0.90 (£1.08 incl VAT)
7210-151
This small plate is designed to accept our fused IEC connector and voltage selector switch (not included) and is typically mounted on the rear of the...
Out of stock
+

£1.20 (£1.44 incl VAT)
7210-152
This small plate is designed to accept our fused IEC connector and cooling fan (not included) and is typically mounted on the rear of the cabinet. Made from...
Out of stock
+

£1.50 (£1.80 incl VAT)
7210-153
This small plate is designed to accept our fused IEC connector, cooling fan and voltage selector switch (not included) and is typically mounted on the rear...
Out of stock
+

£0.75 (£0.90 incl VAT)
7210-155
This small plate is designed to accept our switched fused IEC connector (not included) and is typically mounted on the rear of the cabinet. Made from 3mm...
Out of stock
+

£0.90 (£1.08 incl VAT)
7210-156
This small plate is designed to accept our switched fused IEC connector and voltage selector switch (not included) and is typically mounted on the rear of...
Out of stock
+

£1.20 (£1.44 incl VAT)
7210-157
This small plate is designed to accept our switched fused IEC connector and cooling fan (not included) and is typically mounted on the rear of the cabinet....
Out of stock
+

£1.50 (£1.80 incl VAT)
7210-158
This small plate is designed to accept our switched fused IEC connector, cooling fan and voltage selector switch (not included) and is typically mounted on...
Out of stock
+