YuSynth ADSR Module

This new version of the ADSR module provides a control voltage that makes possible shaping the envelope of a continuous sound. It is mainly used to control the gain of a VCA module or drive the cut off frequency of a VCF module. As usual it is not restricted to these two obvious applications and can be extended to the control of many others modules.

This module has a GATE input. The GATE signal determines the start and duration of the envelope signal. Four parameters can be set using potentiometers :
  • Attack duration : 1ms to 1s (short option) 5ms to 10s (long option)
  • Decay duration :  1ms to 1s (short option) 5ms to 10s (long option)
  • Sustain level : 0 to 10V
  • Release duration :  1ms to 1s (short option) 5ms to 10s (long option)

The direct ADSR signal is available on one output within 0 to 10V range and the inverted ADSR signal is available on a second output either within 0 to -10V range or 10V to 0V range.

A push button is available to manually generate a direct GATE signal. The intensity of the output signal can be visualised by means of a simple LED.

We all have our preferences when it comes to building our modular synth so we offer a range of products* for the build:

  • PCB
  • Individual components
  • Kit of parts (excluding PCB, knobs and connectors)
  • Knobs (Cliff KM20B)
  • Jack sockets
  • Power connectors
  • Front Panel
  • Back Panel
  • PCB Holder
  • PCB Holder Brackets
  • Panel PCBs
  • Wiring Leads

*Not all products are available at the time of writing but are in development

For the latest build information, we recommend visiting the YuSynth website at http://www.yusynth.net/Modular/index_en.html

However, we also include this build information in our product pages plus additional details relating to the complete module assembly using our front panel solution as they are developed.

£1.80 incl VAT (£1.50 exc. tax)
7220-910
Our 3mm thick acrylic size 4 PCB holders are for use with the following YuSynth PCBs: YuSynth VCA YuSynth ADSR YuSynth S&H YuSynth... read more
In stock
Made to order
Normally dispatched within 1-4 days
+
Add to wish list

£13.39 incl VAT (£11.16 exc. tax)
7220-020
YuSynth ADSR Introduction A bare double sided PCB 48x104mm (no need for the wire jumper links shown on the PCB layout) for the Yusynth... read more
In stock
+
Add to wish list

£12.04 incl VAT (£10.03 exc. tax)
7220-220
Have the right skills, tools and test gear to build your own modular synth, then our kits of parts may be just what you need. As a minimum, you will need to... read more
In stock
Made to order
Normally dispatched within 1-4 days
+
Add to wish list

£5.88 incl VAT (£4.90 exc. tax)
7220-520
A 1.6mm thick YuSynth ADSR front panel - 5U high, 1U wide (nominal 8.75 x 1.75") made from a semi-rigid plastic material laser... read more
In stock
Made to order
Normally dispatched within 1-4 days
+
Add to wish list

£4.54 incl VAT (£3.78 exc. tax)
7220-820
A 5U high by 2U wide (222.25x88.9mm) 3mm thick high grade 5251 H22 aluminium back panel for use with our matching YuSynth ADSR laser... read more
In stock
Made to order
Normally dispatched within 1-4 days
+
Add to wish list

£3.90 incl VAT (£3.25 exc. tax)
7212-104
A pack of 4, black aluminium-clad plastic knob with an attractive professional finish. The black anodised body is relieved by bright, diamond-cut features... read more
In stock
+
Add to wish list

£8.57 incl VAT (£7.14 exc. tax)
7212-203
A pack of 3 high quality 1/4" mono jack sockets that we use as standard on our MFOS range of synth modules. These sockets are the PCB... read more
In stock
+
Add to wish list