yuSynth Auto-Bend Module

This module is very useful utility module to simulate the transient frequency bend that can be heard at the onset of a note played by some instruments such as trumpets and oboes. The same effect could be achieved using an ADSR module connected to the FM input of a VCO. However, having such a dedicated autobend module makes it possible to reserve ADSR modules for a "posher" use.

Yves designed a single PCB that can be used either to build a single 1U module or a dual 2U module.

The TIME knob let choose the bend time within a range from 1ms to 0.5s (this can be extended by changing some part values). Two outputs are provided than can be set independently within a range of +/- one octave. Switches are also provided to enable/disable the autobend function.

We all have our preferences when it comes to building our modular synth so we offer a range of products* for the build:

  • PCB
  • Individual components
  • Kit of parts (excluding PCB, knobs and connectors)
  • Knobs (Cliff KM20B)
  • Jack sockets
  • Power connectors
  • Front Panel
  • Back Panel
  • PCB Holder
  • PCB Holder Brackets
  • Panel PCBs
  • Wiring Leads

*Not all products are available at the time of writing but are in development

For the latest build information, we recommend visiting the YuSynth website at http://www.yusynth.net/Modular/index_en.html

However, we also include this build information in our product pages plus additional details relating to the complete module assembly using our front panel solution as they are developed.

£1.80 incl VAT (£1.50 exc. tax)
7220-910
Our 3mm thick acrylic size 4 PCB holders are for use with the following YuSynth PCBs: YuSynth VCA YuSynth ADSR YuSynth S&H YuSynth... read more
In stock
Made to order
Normally dispatched within 1-4 days
+
Add to wish list

£13.39 incl VAT (£11.16 exc. tax)
7220-050
YuSynth Dual Auto-Bend Introduction A bare double sided PCB (no need for the wire jumper links shown on the PCB layout) for the Yusynth... read more
In stock
+
Add to wish list

£13.38 incl VAT (£11.15 exc. tax)
7220-251
Have the right skills, tools and test gear to build your own modular synth, then our kits of parts may be just what you need. As a minimum, you will need to... read more
In stock
Made to order
Normally dispatched within 1-4 days
+
Add to wish list

£8.00 incl VAT (£6.67 exc. tax)
7220-250
Have the right skills, tools and test gear to build your own modular synth, then our kits of parts may be just what you need. As a minimum, you will need to... read more
In stock
Made to order
Normally dispatched within 1-4 days
+
Add to wish list

£5.88 incl VAT (£4.90 exc. tax)
7220-550
A 1.6mm thick YuSynth Auto-Bend front panel - 5U high, 1U... read more
In stock
Made to order
Normally dispatched within 1-4 days
+
Add to wish list

£4.54 incl VAT (£3.78 exc. tax)
7220-850
A 5U high by 1U wide (222.25x44.45mm) 3mm thick high grade 5251 H22 aluminium back panel for use with our... read more
In stock
Made to order
Normally dispatched within 1-4 days
+
Add to wish list

£2.93 incl VAT (£2.44 exc. tax)
7212-103
A pack of 3, black aluminium-clad plastic knob with an attractive professional finish. The black anodised body is relieved by bright, diamond-cut features... read more
In stock
+
Add to wish list

£5.86 incl VAT (£4.88 exc. tax)
7212-106
A pack of 6, black aluminium-clad plastic knob with an attractive professional finish. The black anodised body is relieved by bright, diamond-cut features... read more
In stock
+
Add to wish list

£8.57 incl VAT (£7.14 exc. tax)
7212-203
A pack of 3 high quality 1/4" mono jack sockets that we use as standard on our MFOS range of synth modules. These sockets are the PCB... read more
In stock
+
Add to wish list

£17.14 incl VAT (£14.28 exc. tax)
7212-206
A pack of 6 high quality 1/4" mono jack sockets that we use as standard on our MFOS range of synth modules. These sockets are the PCB... read more
In stock
+
Add to wish list