yuSynth Auto-Bend Module

This module is very useful utility module to simulate the transient frequency bend that can be heard at the onset of a note played by some instruments such as trumpets and oboes. The same effect could be achieved using an ADSR module connected to the FM input of a VCO. However, having such a dedicated autobend module makes it possible to reserve ADSR modules for a "posher" use.

Yves designed a single PCB that can be used either to build a single 1U module or a dual 2U module.

The TIME knob let choose the bend time within a range from 1ms to 0.5s (this can be extended by changing some part values). Two outputs are provided than can be set independently within a range of +/- one octave. Switches are also provided to enable/disable the autobend function.

We all have our preferences when it comes to building our modular synth so we offer a range of products* for the build:

  • PCB
  • Individual components
  • Kit of parts (excluding PCB, knobs and connectors)
  • Knobs (Cliff KM20B)
  • Jack sockets
  • Power connectors
  • Front Panel
  • Back Panel
  • PCB Holder
  • PCB Holder Brackets
  • Panel PCBs
  • Wiring Leads

*Not all products are available at the time of writing but are in development

For the latest build information, we recommend visiting the YuSynth website at http://www.yusynth.net/Modular/index_en.html

However, we also include this build information in our product pages plus additional details relating to the complete module assembly using our front panel solution as they are developed.

2.06 incl VAT (1.72 exc. tax)
7220-910
Our 3mm thick acrylic size 4 PCB holders are for use with the following YuSynth PCBs: YuSynth VCA YuSynth ADSR YuSynth S&H YuSynth... read more
In stock
Made to order
Normally dispatched within 1-4 days
+
Add to wish list

15.33 incl VAT (12.78 exc. tax)
7220-050
YuSynth Dual Auto-Bend Introduction A bare double sided PCB (no need for the wire jumper links shown on the PCB layout) for the Yusynth... read more
In stock
+
Add to wish list

9.16 incl VAT (7.64 exc. tax)
7220-250
Have the right skills, tools and test gear to build your own modular synth, then our kits of parts may be just what you need. As a minimum, you will need to... read more
In stock
Made to order
Normally dispatched within 1-4 days
+
Add to wish list

15.32 incl VAT (12.77 exc. tax)
7220-251
Have the right skills, tools and test gear to build your own modular synth, then our kits of parts may be just what you need. As a minimum, you will need to... read more
In stock
Made to order
Normally dispatched within 1-4 days
+
Add to wish list

6.73 incl VAT (5.61 exc. tax)
7220-550
A 1.6mm thick YuSynth Auto-Bend front panel - 5U high, 1U... read more
In stock
Made to order
Normally dispatched within 1-4 days
+
Add to wish list

5.20 incl VAT (4.33 exc. tax)
7220-850
A 5U high by 1U wide (222.25x44.45mm) 3mm thick high grade 5251 H22 aluminium back panel for use with our... read more
In stock
Made to order
Normally dispatched within 1-4 days
+
Add to wish list

3.35 incl VAT (2.79 exc. tax)
7212-103
A pack of 3, black aluminium-clad plastic knob with an attractive professional finish. The black anodised body is relieved by bright, diamond-cut features... read more
In stock
+
Add to wish list

6.71 incl VAT (5.59 exc. tax)
7212-106
A pack of 6, black aluminium-clad plastic knob with an attractive professional finish. The black anodised body is relieved by bright, diamond-cut features... read more
Out of stock
+
Add to wish list

9.81 incl VAT (8.17 exc. tax)
7212-203
A pack of 3 high quality 1/4" mono jack sockets that we use as standard on our MFOS range of synth modules. These sockets are the PCB... read more
In stock
+
Add to wish list

19.62 incl VAT (16.35 exc. tax)
7212-206
A pack of 6 high quality 1/4" mono jack sockets that we use as standard on our MFOS range of synth modules. These sockets are the PCB... read more
In stock
+
Add to wish list