YuSynth synth kit of parts

YuSynth Clock Divider Module Bare Electronics Parts Kit

 
£9.50
(£7.92 exc. tax)
7220-257
40.00 g.
In stock
Made to order
Normally dispatched within 1-4 days
+
Add to wish list

Have the right skills, tools and test gear to build your own modular synth, then our kits of parts may be just what you need. As a minimum, you will need to be able to identify electronic components, recognise when they need to be correctly orientated, to be able to use a small soldering iron and finally have access to test equipment. Some modules do not require the use of test equipment but any requirement will be in the 'Setting and Trimming' notes.

The kits include all required electronics components as well as pots & switches. The PCB, connectors and knobs are not included but available from Soundtronics as an option. Our, front panel + matching back panel* really finish off the module in a truly professional way. If you purchase the PCB and components through Soundtronics, then we will also support you with technical assistance just in case you get into any build difficulties.

We only source quality components and we even include the more expensive turned pin IC sockets as we feel the product justifies the extra cost both for reliability and serviceability. Our optional 1/4" jack sockets are by Switchcraft, yes you can save money by buying cheaper sockets hence us offering it as an option because we recognise they are a significant cost. We have standardised on Cliff KM20 knobs for all of our modules but again, as it's an option you can choose different knobs to suit your own preference. Finally, all components are available individually should you not need to purchase the whole kit.

*Coming soon

Components Kit Contents (excludes PCB, sockets and knobs)

Reference Part No. Description Qty
Z1....Z3 2101-502 Zener Diode 500mW 5.1V, Fairchild,  1N5231B 3
R1, R2 7163-007 10R 0.25W 1% Metal Film Resistor 2
R5, R12, R17, R24, R29, R36 7163-035 220R 0.25W 1% Metal Film Resistor 6
R8, R14, R20, R26, R32, R38 7163-051 1k 0.25W 1% Metal Film Resistor 6
R13, R25, R37 7163-055 1k5 0.25W 1% Metal Film Resistor 3
R10, R22, R34 7163-067 4k7 0.25W 1% Metal Film Resistor 3
R41 7163-075 10k 0.25W 1% Metal Film Resistor 1
R6, R7, R9, R18, R19, R21, R30, R31, R33, R42, R43 7163-083 22k 0.25W 1% Metal Film Resistor 11
R39 7163-099 100k 0.25W 1% Metal Film Resistor 1
R11, R23, R35 7163-107 220k 0.25W 1% Metal Film Resistor 3
R3, R15, R27, R40 7163-122 1M 0.25W 1% Metal Film Resistor 4
R4, R16, R28 7163-128 1M2 0.25W 1% Metal Film Resistor 3
U1, U2, U3 7212-333 Turned Pin 0.3 inch Dil IC Socket 16 Pin 3
Q1.....Q11 7212-401 BC547C Diotec Bipolar NPN Transistor TO-92 11
D1.....D16 7212-480 1N4148 Signal Diode 16
U1, U2, U3 7212-510 4017B Decade Counter/Driver 3
C6 7212-708 Metallised Polyester Capacitor 1nF 1
C3, C4, C5 7212-749 100nF 5mm X7R Dielectric Radial Ceramic Capacitor 3
C1, C2 7213-108 Radial Electrolytic Capacitor 22uF 25V 2
LD1, LD2, LD3 7213-900 5mm Single Piece LED Panel Mounting Clip - Prominent 3
LD1, LD2, LD3 7213-901 5mm LED Red High Efficency 45mcd 3

No FAQ found

Customers also bought ....

7212-206
£14.20 (£11.83 exc. tax)
7212-206
A pack of 6 high quality 1/4" mono jack sockets that we use as standard on our MFOS range of synth modules. These sockets are the PCB... read more
In stock

7220-008
£19.27 (£16.06 exc. tax)
7220-008
YuSynth Diode Ladder VCF Introduction A bare double sided PCB (no need for the wire jumper links shown on the PCB layout) for the Yusynth... read more
In stock

7220-020
£14.82 (£12.35 exc. tax)
7220-020
YuSynth ADSR Introduction A bare double sided PCB (no need for the wire jumper links shown on the PCB layout) for the Yusynth ADSR synth... read more
In stock