YuSynth Dual Gated Slew Module Bare Electronics Parts Kit

(£16.69 UK, incl VAT)
64 g
In stock

Have the right skills, tools and test gear to build your own modular synth, then our kits of parts may be just what you need. As a minimum, you will need to be able to identify electronic components, recognise when they need to be correctly orientated, to be able to use a small soldering iron and finally have access to test equipment. Some modules do not require the use of test equipment but any requirement will be in the 'Setting and Trimming' notes.

The kits include all required electronics components as well as pots & switches. The PCB, connectors and knobs are not included but available from Soundtronics as an option. Our, front panel + matching back panel* really finish off the module in a truly professional way. If you purchase the PCB and components through Soundtronics, then we will also support you with technical assistance just in case you get into any build difficulties.

We only source quality components and we even include the more expensive turned pin IC sockets as we feel the product justifies the extra cost both for reliability and serviceability. Our optional 1/4" jack sockets are by Switchcraft, yes you can save money by buying cheaper sockets hence us offering it as an option because we recognise they are a significant cost. We have standardised on Cliff KM20 knobs for all of our modules but again, as it's an option you can choose different knobs to suit your own preference. Finally, all components are available individually should you not need to purchase the whole kit.

*Coming soon

Components Kit Contents (excludes PCB, sockets and knobs)

Reference Part No. Description Qty
R1,R2,R4,R13,R21 7163-007 10R 0.25W 1% Metal Film Resistor 5
R5,R14 7163-043 470R 0.25W 1% Metal Film Resistor 2
R10,R19 7163-051 1k 0.25W 1% Metal Film Resistor 2
R9,R11,R18,R20 7163-077 12k 0.25W 1% Metal Film Resistor 4
R6,R8,R15,R17 7163-101 120k 0.25W 1% Metal Film Resistor 4
R3,R14 7163-122 1M 0.25W 1% Metal Film Resistor 2
R7,R16 7163-138 2M2 0.4W 1% Metal Film Resistor 2
SW1,SW3 7212-251 SPDT on/off/on Miniature Toggle Switch 2
SW2,SW4 7212-252 DPDT Miniature Toggle Switch 2
U1, U2, U3, U4 7212-331 Turned Pin 0.3 inch Dil IC Socket 8 Pin 4
Q2,Q4 7212-405 BS170 MOSFET N-Channel Transistor 2
Q1,Q3 7212-407 BF245C FET N-Channel Transistor 2
D1,D2,D3,D4,D5,D6,D7,D8 7212-480 1N4148 Signal Diode 8
U2,U3 7212-541 Single Op-Amp BiFET TL071 2
U1,U4 7212-542 Dual Op-Amp BiFET TL072CP 2
C3,C6 7212-723 Metallised Polyester Capacitor 680nF 2
C4,C5,C7,C8 7212-749 100nF 5mm X7R Dielectric Radial Ceramic Capacitor 4
C1,C2,C9 7213-108 Radial Electrolytic Capacitor 22uF 25V 3
LD1,LD2 7213-900 5mm Single Piece LED Panel Mounting Clip - Prominent 2
LD1,LD2 7213-901 5mm LED Red High Efficency 45mcd 2
P1,P2 7300-070 Synth Pot 16mm 1M Log 2

does this schematic also work with +/-12 V power supply?

Asked by Nate | 21/06/2019, 18:32 | 1 answer(s)

No posts found

Write a review

Customers also bought ....

£1.50 (£1.80 UK, incl VAT)
Our 3mm thick acrylic size 4 PCB holders are for use with the following YuSynth PCBs: YuSynth VCA YuSynth ADSR YuSynth S&H YuSynth Audio...
In stock

£1.70 (£2.04 UK, incl VAT)
Our 3mm thick acrylic size 2 PCB holders are for use with the following YuSynth PCBs: YuSynth VCLFO1 YuSynth VCLFO2 YuSynth Noise + S&H...
In stock

£1.50 (£1.80 UK, incl VAT)
Our 3mm thick acrylic size 1 PCB holders are for use with the following YuSynth PCBs: YuSynth VCO LM394 YuSynth Steiner VCF YuSynth ARP VCF...
In stock

£2.04 (£2.45 UK, incl VAT)
A pack of 2, black aluminium-clad plastic knob with an attractive professional finish. The black anodised body is relieved by bright, diamond-cut features...
In stock

£14.12 (£16.94 UK, incl VAT)
YuSynth Dual Gated Slew PCB Introduction A bare double sided through hole plated PCB (no need for the wire jumper links shown on the PCB...
In stock