Tech support & Community Forum here

YuSynth Dual Pulse Delay Module

This module has two separate units that can be triggered either by one single GATE signal or by two separate GATE signals.

Each unit provides one output signal :
a delayed PULSE signal (0-10V) with a delay that can be set between 1ms and 1s;
and a pulse width that can be set between 1ms and 1s

We all have our preferences when it comes to building our modular synth so we offer a range of products* for the build:

  • PCB
  • Individual components
  • Kit of parts (excluding PCB, knobs and connectors)
  • Knobs (Cliff KM20B)
  • Jack sockets
  • Power connectors
  • Front Panel
  • Back Panel
  • PCB Holder
  • PCB Holder Brackets
  • Panel PCBs
  • Wiring Leads

*Not all products are available at the time of writing but are in development

For the latest build information, we recommend visiting the YuSynth website at

However, we also include this build information in our product pages plus additional details relating to the complete module assembly using our front panel solution as they are developed.

£1.58 £1.31 (£1.57 UK, incl VAT)
Our 3mm thick acrylic size 4 PCB holders are for use with the following YuSynth PCBs: YuSynth VCA YuSynth ADSR YuSynth S&H YuSynth Audio...
Out of stock
Normally dispatched within 1-4 days
Add to wish list

£12.60 £6.55 (£7.86 UK, incl VAT)
YuSynth Dual Pulse Delay Introduction A bare double sided PCB (no need for the wire jumper links shown on the PCB layout) for the Yusynth...
In Stock
Add to wish list

£9.92 £6.70 (£8.04 UK, incl VAT)
Have the right skills, tools and test gear to build your own modular synth, then our kits of parts may be just what you need. As a minimum, you will need to...
1 item(s)
End of line
Add to wish list

£6.13 £4.58 (£5.50 UK, incl VAT)
A 1.6mm thick YuSynth Dual Pulse Delay front panel - 5U high, 1U wide (nominal 8.75 x 1.75") made from a semi-rigid plastic...
In Stock
Add to wish list

£5.67 £4.73 (£5.68 UK, incl VAT)
A 5U high by 1U wide (222.25x44.45mm) 3mm thick high grade 5251 H22 aluminium back panel for use with our matching Dual Pulse Delay...
8 item(s)
End of line
Add to wish list

£4.27 (£5.12 UK, incl VAT)
A pack of 4, black aluminium-clad plastic knob with an attractive professional finish. The black anodised body is relieved by bright, diamond-cut features...
In Stock
Add to wish list

£10.92 (£13.10 UK, incl VAT)
A pack of 4 high quality 1/4" mono jack sockets that we use as standard on our MFOS range of synth modules. These sockets are the PCB...
In Stock
Add to wish list