YuSynth Fixed Resonant Filter Bank Module Laser Engraved 5U Laminate Front Panel

15.85
(19.02 incl VAT)
7220-509
In stock
Made to order
Please allow 5-7 days for shipping
+

A 1.6mm thick YuSynth Fixed Resonant Filter Bank front panel - 5U high, 3U wide (nominal 8.75 x 5.25") made from a semi-rigid plastic material laser engraved to give a hard wearing surface. As a material, it is not suitable for being used without some form of rigid backing material (see below).

  • White artwork on a black background

We find that when using our panel mounting components such as pots and sockets, you can mount this panel to a rigid backboard of up to 3mm thick. The backboard can be plywood or Aluminium (ideally used 6082T6 or 5251 H22 grades as these are 'stiffer' than low grade 1050 types) for example and the panel component fixings will hold the two layers together. If you use a 3mm thick backboard, it does not leave enough thread length to use MFOS PCB mounting brackets but we have our own solution to this - a ready made 3mm thick aluminium back panel with our own 'L' brackets for the PCB mounting.

Each panel is supplied ready engraved, cut to size with all holes cut out. The cut-outs suit the panel components we provide so check these out if you are using your own bits to ensure the diameters are suitable.

If you click on the image above, you will see a larger and higer resolution version, if you then click on the 'X' in the top right corner of the hi res version, it will zoom to full size.

No FAQ found

No posts found

Write a review

Customers also bought ....

7212-205
12.83 (15.40 incl VAT)
7212-205
A pack of 5 high quality 1/4" mono jack sockets that we use as standard on our MFOS range of synth modules. These sockets are the PCB...
In stock

7220-009
25.26 (30.32 incl VAT)
7220-009
YuSynth Fixed Resonant Filter Bank Introduction A bare double sided PCB (no need for the wire jumper links shown on the PCB layout) for...
In stock

7220-001
19.32 (23.18 incl VAT)
7220-001
YuSynth LM394 VCO Introduction A bare double sided through hole plated PCB (no need for the wire jumper links shown on the PCB layout)...
In stock

7220-002
19.32 (23.18 incl VAT)
7220-002
YuSynth VCLFO PCB Introduction A bare double sided through hole plated PCB (no need for the wire jumper links shown on the PCB layout)...
In stock

7220-042
13.23 (15.87 incl VAT)
7220-042
YuSynth Audio/CV Mixer Introduction A bare double sided PCB (no need for the wire jumper links shown on the PCB layout) for the YuSynth...
In stock