Tech support & Community Forum here

YuSynth Minimoog VCF Module

Well, it was meant to be! Yves Usson could not possibly avoid building a clone of this very successful and famous filter: the Minimoog VCF!
This filter has a sound of its own that contributed to the success of many songs during the 70s and 80s.

The aim here was to design a quite faithful copy of this mythic filter while using components that minimize the burden of selecting a great number of matched transistors. This is why he used cheap transistor arrays (CA3046). As for all the other filters of the YUSYNTH project, he has added an input and an output buffer to adapt this filter to the input and output levels of his modular system.

We all have our preferences when it comes to building our modular synth so we offer a range of products* for the build:

  • PCB
  • Individual components
  • Kit of parts (excluding PCB, knobs and connectors)
  • Knobs (Cliff KM20B)
  • Jack sockets
  • Power connectors
  • Front Panel
  • Back Panel
  • PCB Holder
  • PCB Holder Brackets
  • Panel PCBs
  • Wiring Leads

*Not all products are available at the time of writing but are in development

For the latest build information, we recommend visiting the YuSynth website at

However, we also include this build information in our product pages plus additional details relating to the complete module assembly using our front panel solution as they are developed.

£16.38 £8.51 (£10.21 UK, incl VAT)
YuSynth MiniMoog Transistor Ladder VCF Introduction A bare double sided PCB 75x100mm (no need for the wire jumper links shown on the PCB...
In Stock
Add to wish list

£25.70 £15.30 (£18.36 UK, incl VAT)
Have the right skills, tools and test gear to build your own modular synth, then our kits of parts may be just what you need. As a minimum, you will need to...
1 item(s)
End of line
Add to wish list

£12.26 £9.17 (£11.00 UK, incl VAT)
A 1.6mm thick YuSynth transistor ladder VCF front panel - 5U high, 2U wide (nominal 8.75 x 3.5") made from a semi-rigid plastic material laser...
Out of stock
Normally dispatched within 1-4 days
Add to wish list

£1.58 £1.31 (£1.57 UK, incl VAT)
Our 3mm thick acrylic size 1 PCB holders are for use with the following YuSynth PCBs: YuSynth VCO LM394 YuSynth Steiner VCF YuSynth ARP VCF...
In Stock
Add to wish list

£6.42 (£7.70 UK, incl VAT)
A pack of 6, black aluminium-clad plastic knob with an attractive professional finish. The black anodised body is relieved by bright, diamond-cut features...
In Stock
Add to wish list

£16.39 (£19.67 UK, incl VAT)
A pack of 6 high quality 1/4" mono jack sockets that we use as standard on our MFOS range of synth modules. These sockets are the PCB...
In Stock
Add to wish list