YuSynth Quad VC Panner + Mixer Module PCB Holder

£1.90
(£2.28 incl VAT)
7220-941
In stock
+

A 3mm thick acrylic PCB holder for use with the YuSynth Quad VC Panner & Mixer module, it accomodates both PCBs back to back.

The PCB holder is attached to the aluminium back panel with our Soundtronics 'L' brackets (unless otherwise stated) and the PCB attaches to the holder with a fixing screw set.

Advantages

  • Allows the PCB to be sited in the optimal position independent of panel controls
  • Protects the rear of the PCB from accidental short circuits

Customers also bought ....

7212-900
£11.25 (£13.50 incl VAT)
7212-900
A traditional moving coil VU meter which we use in the YuSynth Output Mixer module. Note: If buying the output stage and monitor components kit then these...
In stock

7220-904
£1.50 (£1.80 incl VAT)
7220-904
Our 3mm thick acrylic size 3 PCB holders are for use with the following YuSynth PCBs: YuSynth Quad LFO YuSynth Output Stage & Monitor...
Out of stock

7220-041
£30.69 (£36.83 incl VAT)
7220-041
YuSynth Quad VC Panner & Mixer Introduction A bare double sided PCB for the Output Stage & Monitor synth module. Being double sided,...
In stock

7220-044
£14.12 (£16.94 incl VAT)
7220-044
YuSynth Output Stage & Monitor Introduction A bare double sided PCB (no need for the wire jumper links shown on the PCB layout) for the...
In stock

7220-241
£44.45 (£53.34 incl VAT)
7220-241
Have the right skills, tools and test gear to build your own modular synth, then our kits of parts may be just what you need. As a minimum, you will need to...
In stock