DIY MFOS Voltage Controlled Low Frequency Oscillator KB
We always recommend visiting the MFOS website before building where the latest 'offical' information and news can be found. Here on the Soundtronics website, you will find selected information from the MFOS site plus additional information and resources to aid the building and maintaining of your MFOS synth.
Introduction to the MFOS VCLFO
The frequency can be voltage controlled to add a new dimension to your sound palette. The pulse width of the rectangle wave can be varied between approximately 10% and 90% again lending variability to the modulation capabilities of this LFO. Voltage control can be used to vary the pulse width as well.
Features
- Simultaneous Sine, Triangle, Saw, Ramp, and Variable Pulse Width Rectangle Outputs.
- Voltage Control of Frequency (approximate log response, NOT 1V/Octave)
- Voltage Control of Rectangle Pulse Width
- Fine and Coarse Frequency Control
- Very Low Frequency (1 Cycle per several minutes)
- Output levels are all approximately +/-5V (+ or - 300 mV).
Documentation & Downloads
Under Construction