Save 37%

MFOS Sub-Commander Guitar Synth Bare PCB

List price: £50.19
£31.87
(£38.24 UK, incl VAT) You save: £18.32 (37%)
7210-036
70 g
2 item(s)
End of line
+
Add to wish list

The MFOS Sub-Commander Guitar Synth buffers your guitar's signal, creates a pulse waveform (at the same frequency as the guitar) divides it's frequency in half (sub-octave generator) and generates a gate when you pluck a string so you can control the SUB-COMMANDER's AR generators. It permits you to mix the sub-octave, original signal and pulse signal and then route them through the SUB-COMMANDER's VCF and VCA. By doing this you can generate some very cool synthesizer-like sounds and effects for your electric guitar. (Some sound samples are available below.)

This is not to be compared with units that require a hex pickup and special processing to drive frequency to voltage convertors or MIDI controllers.

Features

  • Generates sub-octave and pulse waveforms
  • Generates gate and trigger signals
  • VCF controlled by dedicated AD generator and LFO
  • VCA controlled by dedicated AD generator and LFO
  • Mix clean sound with filtered/modulated sound.
  • Auto-Wah, Warbling Wah, Tremolo, Pseudo-Ring Mod
  • Gives your guitar a bag of new tricks
  • Advanced project for advanced electronics hobbyists

Supplied without instructions which are available on the MFOS website or components that are available from us at Soundtronics either individually or as a kit.

Customers also bought ....

7210-236
£77.23 £66.86 (£80.23 UK, incl VAT)
7210-236
Have the right skills, tools and test gear to build your own guitar sub-commander, then our kits of parts may be just what you need. As a minimum, you will...
1 item(s)
End of line

7210-536
£24.53 £18.34 (£22.01 UK, incl VAT)
7210-536
A 1.6mm thick MFOS Sub-Commander Guitar Synth front panel - 5U high, 4U wide (nominal 8.75 x 7") made from a semi-rigid plastic material laser...
Black Blue Red Green Orange Purple
1 item(s)
End of line

7210-936
£2.31 £1.93 (£2.32 UK, incl VAT)
7210-936
Draft Description, more information and detailed photos to follow. Introduction Our 3mm thick acrylic PCB holders are for use with our MFOS synth...
1 item(s)
End of line

7210-035
£16.73 £10.62 (£12.74 UK, incl VAT)
7210-035
A bare PCB for the MFOS Guitar Envelope Follower. The main idea of an envelope follower is to create a voltage that describes the envelope of the...
3 item(s)
End of line

1090-081
£11.27 (£13.52 UK, incl VAT)
1090-081
A 12Vac 500mA (note AC not DC) for use with our MFOS wall wart power supplies and MIDI Ultimate. Fitted with a 2.1mm power plug lead (1.8m long). EU Plug...
In Stock