YuSynth synth kit of parts

YuSynth Dual Ring Modulator Module Bare Electronics Parts Kit

 
£9.78
(£8.15 exc. tax)
7220-261
40.00 g.
In stock
Made to order
Normally dispatched within 1-4 days
+
Add to wish list

Have the right skills, tools and test gear to build your own modular synth, then our kits of parts may be just what you need. As a minimum, you will need to be able to identify electronic components, recognise when they need to be correctly orientated, to be able to use a small soldering iron and finally have access to test equipment. Some modules do not require the use of test equipment but any requirement will be in the 'Setting and Trimming' notes.

The kits include all required electronics components as well as pots & switches. The PCB, connectors and knobs are not included but available from Soundtronics as an option. Our, front panel + matching back panel* really finish off the module in a truly professional way. If you purchase the PCB and components through Soundtronics, then we will also support you with technical assistance just in case you get into any build difficulties.

We only source quality components and we even include the more expensive turned pin IC sockets as we feel the product justifies the extra cost both for reliability and serviceability. Our optional 1/4" jack sockets are by Switchcraft, yes you can save money by buying cheaper sockets hence us offering it as an option because we recognise they are a significant cost. We have standardised on Cliff KM20 knobs for all of our modules but again, as it's an option you can choose different knobs to suit your own preference. Finally, all components are available individually should you not need to purchase the whole kit.

*Coming soon

Components Kit Contents (excludes PCB, sockets and knobs)

Reference Part No. Description Qty
R1, R2 7163-007 10R 0.25W 1% Metal Film Resistor 2
R24, R46 7163-047 680R 0.25W 1% Metal Film Resistor 2
R17, R18, R39, R40 7163-053 1k2 0.25W 1% Metal Film Resistor 4
R8, R9, R30, R31 7163-055 1k5 0.25W 1% Metal Film Resistor 4
R5, R6, R13, R15, R27, R28, R35, R37 7163-061 2k7 0.25W 1% Metal Film Resistor 8
R12, R14, R16, R34, R36, R38 7163-071 6k8 0.25W 1% Metal Film Resistor 6
R22, R44 7163-075 10k 0.25W 1% Metal Film Resistor 2
R4, R7, R26, R29 7163-077 12k 0.25W 1% Metal Film Resistor 4
R11, R19, R20, R21, R33, R41, R42, R43 7163-079 15k 0.25W 1% Metal Film Resistor 8
R23, R45 7163-095 68k 0.25W 1% Metal Film Resistor 2
R3, R10, R25, R32 7163-105 180k 0.25W 1% Metal Film Resistor 4
U2, U4 7212-331 Turned Pin 0.3 inch Dil IC Socket 8 Pin 2
U1, U3 7212-502 MC1496DG Balanced Modulator / Demodulator SOIC-14 Case 2
U2, U4 7212-542 Dual Op-Amp BiFET TL072CP 2
C5, C6 7212-718 Metallised Polyester Capacitor 100nF 2
C7, C8, C9, C10, C11, C12 7212-724 Metallised Polyester Capacitor 1uF 6
A2, A4 7212-852 Multiturn Cermet Preset Top Adjust SIL 200R 2
A1, A3 7212-853 Multiturn Cermet Preset Top Adjust SIL 500R 2
C1, C2 7213-108 Radial Electrolytic Capacitor 22uF 25V 2
C3, C4 7213-110 Radial Electrolytic Capacitor 100uF 25V 2

Hi again, Sorry for all the questions... I was just populating the resistors and noticed that the BOM and the PCB list R24,R46 as 470R. The BOM on your site and what I received are 680R resistors. Will there be any trouble using the 680R resistors or should I substitute the 470R instead? thanks again, -Dale

Asked by Dale | 03/03/2017, 02:23 | 1 answer(s)

Hi, I have recently purchased the Yusynth ring modulator PCB and the kit. I am having trouble identifying pin 1 on the SOIC. On the data sheet on your site it shows a circle with pin 1. However, on the part there is no circle. I would attach a picture of the chip I received but there is no way to do that on the FAQ page. Do you have any idea how to identify which pin is pin 1? Thank you.

Asked by Dale | 02/03/2017, 14:17 | 1 answer(s)

Customers also bought ....

7163-029
£0.04 (£0.03 exc. tax)
7163-029
These resistors are suitable for use in both hobby projects se as well as commercial /  industrial equipment. Supplied in a hobby size pack of... read more
In stock

Minimum quantity for "120R 0.25W 1% Metal Film Resistor" is 10.


7163-063
£0.04 (£0.03 exc. tax)
7163-063
These resistors are suitable for use in both hobby projects se as well as commercial /  industrial equipment. Supplied in a hobby size pack of... read more
In stock

Minimum quantity for "3k3 0.25W 1% Metal Film Resistor" is 10.


7163-077
£0.04 (£0.03 exc. tax)
7163-077
These resistors are suitable for use in both hobby projects se as well as commercial /  industrial equipment. Supplied in a hobby size pack of... read more
In stock

Minimum quantity for "12k 0.25W 1% Metal Film Resistor" is 10.